Brandt FK 39/7

Single-sided edge banding machine
Folded edge banding machine
Power requirements: 380 V/3 phases/50 kW
Single-sided folded edge banding machine, right-handed, for processing hot-melt adhesive-coated,
formable edge materials (foils and veneers) using the forming process.
Door pass-through with fold facing down.
Machine stand with chain conveyor and electrically adjustable double-belt top pressure.
Workpiece thickness approx. 10 - 55 mm.
Workpiece width min. 140 mm.
Edge thickness 0.4 - 1.0 mm.
Feed rate 10 - 30 m/min.
Feed speed not equal to working speed
Pneumatic connection 6 bar

Right-hand machine
Sliding chain, chain plates 80 mm wide, 60 mm long, automatic central lubrication
Top pressure unit with composite V-belt, 70 mm wide, height adjustable by motor, max. height 70 mm (scale)
Infeed guide on the right
Pivoting control panel, right
Rebate trimming unit on cross carriage, manually adjustable via scale, motor 380 V, 7.5 kW, 100 Hz, 6,000 rpm
Double column with 2 cross carriages, each with 1 motor 380 V, 2.2 kW, 100 Hz, 5,650 rpm, adjustment via scale
Soundproof hood over format section - 1 door with lighting and electric locking
Gluing section with roller plate, hot air blower for the rebate edge, pre-coated from below, pressure zone
Gluing section with roller plate, hot air blower for Folded edge, pre-coated vertically, pressure zone
Gluing unit with roller plate, hot air blower for overlap edge, pre-coated vertically, pressure zone
Cross-cutting unit, horizontal on round guides with 20 mm deep cross-cutting device, saw diameter 150 mm, 2 x 0.33 kW,
for trimming the front and rear edge overhang with two HF motors 0.3 kW, 200 Hz
Soundproof hood above cross-cutting unit - 1 door with lighting and electric lock, length approx. 1,400 mm
Hot air blower, heated pressure shoe for fold, pressure rollers for fold, cooled pressure shoe, pressure rollers
Bevel trimming unit from below, pivoting with 1 Y motor 220V, 0.56 kW, 200 Hz, 11,200 rpm, lateral scanning
Bevel trimming unit with 2 motors, each 0.55 kW, 200 Hz, pivoting, top-mounted sensing roller, bottom-mounted sensing roller,
side sensing via shoe, upper milling motor with adjustable top pressure unit
Soundproof hood over milling unit with lighting and electric locking - 1 door, length = 1,780 mm
Free space approx. 500 mm
3 sanding units, bottom-mounted, top-mounted, bottom-mounted
Buffing unit with 1 motor from bottom-mounted, 380 V, 50 Hz, 1,380 rpm, 0.55 kW
Machine outlet 500 mm
Lenze feed gear, 11 kW, 10 - 40 m/min. according to display
Roller rail
Extraction: 1 x diameter 220 mm, 1 x diameter 180 mm