Bobst SPERIA 106 E

CUBE control system
Centerline system for quick job changeover
Feed table with 4 front lays, adjustable in pairs with front register control
Feed table with Pull guide (OS) adjustable according to Centerline marks, with side register control
Feed table with double sheet detector. Mechanical, integrated on pull guide (OS)
Feed table with sheet-hold down device (guiding the sheets to front lays)
Feed table with upper transport equipment for paper, paperboard and corrugated board
Feed table with transport belts (with lateral guidance and automatic tensionning system)
Synchronization device timing the sheet arrival against the front lays when the machine is at a standstill
Pull lay operator side
Manual Non-Stop device (Height pile reduced by approximately 200 mm in non-stop mode)
Cutting plate with micrometric adjustment for 1 mm thin plates
1 Die-cutting chase
Grippers re-opening device (Platin)
Equipment centering and locking on platin
Synthetic material supporting plate on platen (Thickness 23.5 mm (0,925)
1 Upper chase : fixed bottom plate (T.101.001) Plate, thickness 2 mm,
and make-ready protection plate made of syntethic material, thinckness 1 mm.
Cutting size limited to 705 x 1060 mm (27 3/4 x 41 3/4)
1 Upper stripping pull-out frame
1 Lower stripping pull-out frame with all its tools
1 Upper stripping equipment required to create a waste stripping tool, including crossbars,
clamps, stripper holders and stripping pins of 3, 5 and 10 mm of diameter
Compensating plate. Thickness 4 mm. In ground steel
Adjustable supporting plate centerings.
1 Upper chase Quick-Lock: fixed bottom Plate, thickness 2 mm, and make-ready protection plate made of syntethic material, thinckness 1 mm.
Upper pull-out frame quick lock for stripping ((Decreases extraction tool assembly times.
The quick-closing device allows the tool to be changed in the machine)
1 Lower central pull-out frame quick-lock (Stripping Station)
Lower stripping equipment for waste stripping including crossbars, pins and supports (This equipment mounts on central pull-out frame quick-lock)
Outside table for the preparation of the stripping unit
Adjustable rear and side joggers with Centerline marks in delivery
Automatic Non-Stop belt: it is automatically introduced at the exit when the stack of sheets is finished.
Control cabinet cooling unit
Cutting force 260 TON
Electronic device for sheet travel control
7.700 speed/h (depending on cardboard and type of iob feature)
Board quality processable : carta (min. 80g/m²); cartone (250/2000 g/m²); corrugate* (3 - 4 mm.) ( * )
Carton acceptable warp : 4% of the widthwise sheet
Compliant with European Directives for essential safety and health standards relating to design and construction
and with American standards UL 508 and NFPA concerning industrial equipment
Platform
Frame loader (die cutting frame turn around): allows the change and preparation
of the frame and the die cutting corresponding to the next job (Includes an increase in the surface of the platform)