Bobst Spanthera 106 LE

Less than 17,000 hours running time from new. Approx 90 million sheets produced.
Elevated machine
Max speed 9,000 cph
Max size 760 mm x 1060 mm
Cutting force upto 260 tonnes

Feeder section with:
- Optical Register Sheet Infeed System ORSIS (Optical Register Sheet Infeed synchronisation).
- Platen with camshaft drive.
- Machine compatible with HIGHWAY TDF-VIEW system.
- Centreline system for fast job changes.
- Electronic sheet flow control.
- Adjustable centring on the stripper.
- Control cabinet air conditioning.
- Several automated functions to assist the machine operator including
- Controlled machine stop after system error (allows the sheets in the machine without interruption).
- Feeding of a sheet from the feeder into the stripping station for control of the die-cutting / creasing.
- Feeding a sheet into the stripping station to check the tool position, if necessary.
- Programmed stop of the machine for changing the equipment
- Bobst-Electronic machine operating system C.U.B.E. ll (Control Unit Bobst Electronic) with colour screen.
- Main drive by frequency-controlled asynchronous motor
- The ORSIS optical infeed system includes:
- Independent feeder controlled by electric shaft.
- Optical side register control.
- Automatic lateral stack correction (+/- 40 mm) controlled by the optical side register.
- Automatic synchronisation device for optimum positioning of the sheets to the front lays.
- Deceleration device with electronic control (3 speeds for feeding the sheets to the front lays).
- Stepless stroke of the pile support plate to maintain a constant pile height.
- Adjustable side blower .
- Suction head with multiple adjustment options.
- Optical side register control, without sheet contact, with large correction range in both directions (+/- 10 mm).
- A camera aligns the sheets laterally according to the sheet edge or the print image.
- Allows the alignment of all materials (paper, solid board, laminated corrugated board).
- Coated with a stainless steel sheet, with antistatic effect.
- Introduction to the feed table with side ramps.
- 4 x Individually adjustable front lays with sheet control during production.
- Control system by fibre optics
- Double sheet control without contact.
- Sheet hold-down device (guiding the sheets to the grippers).
- Upper feed table frame with manual lifting aid.
- Upper transport equipment for paper and cardboard.
- 2 x transport belts.
- With lateral guide and automatic clamping system.
- Movable platen with short stroke and cam drive.
- Cam-controlled platen movement allows a sheet transfer with low acceleration and deceleration.
- Platen with constant parallelism over the entire pressure range.
- Upper platen with vacuum.
- Gripper reopening device.
- Automatic centring and locking of the closing frame and the base plate.
- Adjustable centring for base plate (+/- 0.9 mm).
- Locking of the clamping frame against the upper platen.
- Measuring the punching force with tension gauge.
- Motorised adjustment of the punching force. By push button.
- Support plate made of synthetic material. 12 mm thick.
- A set of 5 x thin plates, thickness 1 mm
- 1 x Upper quick-action clamping frame: screwed base plate (E-3)
- Base plate, 2 mm thick, with a synthetic lashing protection plate,1 mm thick.
1 x levelling plate (E-5) 4 mm thick. This ground steel plate is designed for the use of thin punching plates. Advantageous for repeat orders.
- Stripping station with:
- Centre drawer frame with quick clamping.
- BSSR - Upper quick clamping frame.
- Integrated quick-clamping device for a finished upper stripping tool.
- Adjustable centring for the upper, middle and lower stripping tool.
- 1 x Fixing material for the upper stripping mould for quick clamping
Allows the attachment of a wood stripping mould in the upper quick clamping device
- integrated upper quick-clamping device.
1 x Fastening material for the stripping board on the centre frame with quick clamping
1 x Lower drawer frame
1 x Lower stripping equipment
- Waste stripping equipment with support rods and telescopic pins.
Delivery Section includes:
- Pallet support plate.
- Pneumatically controlled front and side straighteners.
- Rear and side straighteners with centreline markings adjustable.
- Continuous stack lowering with minimum/constant drop height onto the stack.
- Brake brush.
- Motorised, the contact pressure and angle position can be adjusted via the C.U.B.E.
The mode of operation is automatic, it adapts to the machine speed.
- Simple adjustment via the digital display enables the brush and the positioning of the brush and tray according to the sheet length.
- Blower sheet down holder controlled by C.U.B.E.
Allows accurate stacking of sheets for light grammages and paper.
- Manual non-stop rake.
- Photocells to check whether sheets are outside the grippers