Blanchard 22K-42

BLANCHARD 22K-42
Year 1968


42" Magnetic Chuck Diameter,
22 to 24" Approximate Range Over Chuck With New Wheel
22" Diameter of Wheel Chuck,
Cortland 5 Segment Wheel
48" Swing Inside Water Guards
720 RPM Wheel Speed
(6) Ranges of Chuck Speeds 5,7,10,15,20 & 27 RPM
Automatic Downfeeds Feed 0 to 70 IN/MIN
50 HP, 3 Phase, 60 Cycle, 440 Volt, 705 RPM
Floor Space: 13.5"L x 8.4"W
Height: 8.7" Min., 9.1" Max.
Approx. Weight: 14,250 lbs.

Scope of Work:
Rebuild Spindle.
Add new grease lube system.
Wire all components in panel for new grease lube system.
Run all new grease lube lines.
Remove and clean upper feed box.
Drain oil, pull cover plate, and clean table drive transmission.
Replace base ways.
Scrape saddle way surfaces to new ways.
Replace way wipers.
Replace scraper paddles on conveyor.
Run new lube lines on saddle.
New water guards.
Clean up electrical panel.
Paint machine.
Check table flatness.
Tram spindle to table.
Grind table flat.
Test grind parts.
Run machine for 8 hr.
Run-off machine.