Biesse Techno FDT CN + Techno SDT CN

Automatic ELECTRONIC Drilling LINE with Dowels Inserting, CNC controlled,
CE Mark (with cabin for full protection of the line and with 4 side doors)

R10034A) Through-Feed MULTI-BORER “BIESSE” Techno FDT with C.N.
– N. 2 through-feed motorized conveyoring belts, with adjustable speed from 35 up to 75 m/min
– N. 2 horizontal units (each one with 2 drilling block at 11 spindles each, HP 1.5x 2)
– N. 6 bottom units (each one with 2 drilling blocks with various spindles each, HP 1.8 x 2)
– N. 6 top units (each one with 2 drilling blocks with various spindles each, HP 1.8 x 2)
– N. 6 top pneumatic pressure units
– N. 2 endless screws to evacuate the wastes.

R10034B) Through-Feed MULTI-BORER & DOWELS INSERTER “BIESSE” Techno SDT with C.N.
– N. 2 through-feed motorized conveyoring belts, with adjustable speed from 35 up to 75 m/min.
– N. 2 horizontal units (each with 5 inseritng nozzles, such as Glue injectors and dowel drivers)
– N. 6 bottom units (each one with 2 drilling blocks with various spindles each, HP 1.8 x 2)
– N. 6 top units (each one with 2 drilling blocks with various spindles each, HP 1.8 x 2)
– N. 4 top pneumatic pressure units
– N. 2 endless screws to evacuate the wastes.

Numerical Control NC 500 (with software Tooling System) to manage and run these 2 boring machines together.
The CNC controls the automatic movement of the horizontal movable unit (on X axe)
The vertical movement (Hv) of the 2 horizontal units, all the vertical units (X axe)
The boring heads (Y1 and Y2 axes), the first horizontal drilling blocks (Y1 axe) the stops (Y axe)
The transport belts (X axe) and the vertical pressure devices (X axe); then to set-up the automatic working cycles