Biesse STREAM SB1 7.5

Double Edgebanders
Short Description:
Type of edging Thin edge, Thick edge, Solid wood
Gluing System EVA Hotmelt, PUR
Combination Squaring Edgebanding Machine First Pass
Max Panel Width 1200 mm
Operating Units Right Side 8 nr
Operating Units Left Side 9 nr

Long Description:
Subfamily Double Edgebanders
Min. panel height 10 mm
Max. panel height 60 mm
Min. panel width 240 mm
Max. panel width 1200 mm
Min. edge thickness 0.3 mm
Max. edge thickness 3 mm

Top pressure
Pressure with rubber belt
Panel support guides with positioning by NC
No. Panel Sizing / Milling units Left Side 2

1
Unit double chipper, top and bottom
Constructor model DT 10
with positioning by NC
motor power 8.1 KW
r.p.m. 6000 RPM

2
Unit miller hogger
Constructor model FS 30
with positioning by NC
motor power 5.8 KW
r.p.m. 6000 RPM

Same technical characteristics on the left side
Lamps to preheat the side of the panel
Edge coil magazine
no. positions 6

Gluing system
glue pot for EVA hot melt glue
glue pot for PUR glue
premelter for EVA hot melt glue
premelter forPUR glue
premelter for PUR glue
NORDSON VERSABLUE
Roller set to press the edge
no. pressure roller 7
No. Edge Processing Units 5

1
Processing Unit top and bottom rough trimming
no. motors 2
with positioning by NC
Presence of spindle moulders on the left edging part
motor power 2 KW
r.p.m. 12000 RPM

2
Processing Unit fine trimming to trim and round
no. motors 2
with positioning by NC
Presence of spindle moulders on the left edging part
motor power 2 KW

3
Processing Unit edge scraping
with positioning by NC
Presence of spindle moulders on the left edging part

4
Processing Unit glue scraping
automatic timed intervention
Presence of spindle moulders on the left edging part
motor power 0.37 KW

5
Processing Unit buffing
no. motors 2
Presence of spindle moulders on the left edging part
motor power 0.37 KW
Spray unit
Safety standard CE mark