Biesse STREAM B1 8.5

Single-sided edgebander with panel return
CONTROL SYSTEM
• Windows operating system
• Adjustable hanging control panel for machine control
• Built-in electrical cabinet

TECHNICAL FEATURES :
• Workable panel height with straight edge (min - max): 10 - 60 mm
• Thickness of the edges applicable in roll (min - max): 0.4 - 3 mm

PANEL INTRODUCTION AND FEEDING SYSTEM:
• Square introducer
• Upper presser with electronic positioning managed by NC
• Infeed guide with electronic positioning managed by NC
• Side panel support with extruded aluminum guide complete with sliding wheels

PARTS TO CORRECT:
• RT-30 RECTIFIER unit in input. First incoming copy with electronic positioning managed by NC. AUTO-SET
device that ensures optimal positioning of the cutter according to the thickness of the workpiece.

GLUING, LOADING AND EDGE PRESSURE :
• ANTIADESIVIZING unit to allow optimal cleaning of the workpiece on the upper and lower surface of the panel
• SP10 GLUEING unit complete with:
- Preparation for AirForceSystem hot air gluing system
- Gluing with polyurethane glue
- Reel holder disc
- Z axis for edge guide device
- Cutter for cutting the edge in rolls complete with automatic adjustment of the shear pressure
- Edge pressure roller unit with timed rollers on straight profiles - Electronic positioning managed by NC - Nr. 1 + 5 pressure rollers

PART TO EDGE :
• IT90-S ENDING unit with 2 motors for cutting the excess edge in the front and rear of the panel with inclination
of the motors on the vertical axis from 0 ° to 25 ° with automatic rotation to adjust the excess edge. Kit n. 3 pneumatic positions managed by NC
• RS10 ROUGHING TRIMMER unit - Automatic pneumatic exclusion - It consists of 2 motors with pneumatic adjustment on 2 positions - Pro-nesting kit
• BENDING unit RF40 for trimming and / or top and bottom edge bending - Automatic adjustment
via 4 axes managed by NC. Automatic pneumatic exclusion of the group - Pro-nesting kit
• Gliding LIQUID APPLICATOR group by spray
• AR30 multifunction ROUNDING unit with 2 motors with FAST system with 2 pre-selectable positions
from the NC for automatic rounding of the edge corners in the upper and lower part of the panel
• RASCHIABORDO RB40 group for finishing thick ABS / PVC edges to eliminate imperfections deriving
from previous processing on the upper and lower part of the edge. Pneumatic multi-spoke from NC
• RC20 GLUE SCRAPER unit to remove any excess glue on the flat surface of the panel near the edges
• Spray cleaning LIQUID APPLICATOR group
• FB30 UNIVERSAL MILLING unit
• SZ30 overlapping oscillating BRUSHES unit with 2 motors for cleaning and polishing the rounded edge
• PHON PH-10 group

PREPARATIONS AND ACCESSORIES :
• CVM PRS EKO panels return
• Bar-code reader

STANDARDS AND OPTIONALS FOR SAFETY :
• Copy of the original EC declaration of conformity
• Cabin for the protection and soundproofing of the operating groups
• Suction system in the upper part of the protection cabin