Biesse Stream B1 8.0
AMERICA North (USA-Canada-Mexico)
CONTROL SYSTEM:
• Windows operating system
• Adjustable hanging command board to control the machine
• Incorporated electrical cabinet
TECHNICAL FEATURES :
• Edge thickness applicable in roll (min – max): 10 – 60 mm
• Edge thickness applicable in strips – narrow pieces (min – max): 0.4 – 3 mm
PANEL INTRODUCTION AND FEEDING SYSTEM:
• Squared infeeding unit
• Top pressure unit with electronic positioning controlled by NC
• Infeed guide with electronic positioning managed by NC
• Lateral panel support with aluminum track complete with supporting wheels
SQUARING UNIT:
• INFEED PRE-MILLING UNIT RT-30. First incoming copy with electronic positioning managed by NC.
AUTO-SET device that ensures optimal positioning of the cutter according to the thickness of the workpiece
GLUING UNIT, LOADING AND PRESSURE OF EDGE
• ANTI-ADHESIVE unit to allow optimal cleaning of the workpiece on the upper and lower surface of the panel
• GLUING UNIT SP10 complete with:
– Predisposition for hot air gluing system AirForceSystem
– Gluing system for polyurethane glue
– Disk coil holder
– Z axis for edge guide device
– Guillotine to cut the edge in rolls with automatic regulation of the shear pressure
– Edge pressure roller with timed rollers on straight profiles – Electronic positioning managed by NC – Nr. 1 + 5 pressure rollers
EDGEBANDING UNIT:
• END TRIMMING UNIT IT90-S with n.2 motors to cut the excess edge on the front and rear of the panel
with inclination of the motors on the vertical axis from 0° to 25° automatic adjustment of the excess edge.
Kit of nr. 3 pneumatic positions managed by NC
• ROUGH TRIMMING UNIT RS10 – Automatic pneumatic exclusion of the group – It consists of 2 motors with pneumatic adjustment on 2 positions – Pro-nesting kit
• FINE TRIMMING UNIT RF40 for trimming and/or edging the top and bottom of the applied edge
– Automatic regulation through 4 axes managed by NC. Automatic pneumatic exclusion of the group – Pro-nesting kit
• SPRAY LIQUID APPLICATION UNIT
• Multifunctional ROUNDING UNIT with nr. 2 motors AR30 with FAST system
with nr.2 positions pre-selectable from NC for automatic edge corners rounding on top and bottom of the panel
• EDGE SCRAPING UNIT RB40 for edge finishing in ABS/PVC very thick to eliminate the imperfections derived
from previous machining operations on the upper and lower part of the edge. Pneumatic multi-radius from NC
• GLUE SCRAPING UNIT RC20 for the removal of the excess glue from the join between edge and panel
• SPRAY LIQUID APPLICATION UNIT
• MILLING UNIT FB30
• OVERLAPPED BRUSHING UNIT SZ30 with nr. 2 motors for cleaning and polishing the rounded edge
• BUFFING UNIT PH-10