Biesse Rover C 6.40 CONF.3

CNC machining center
Working area configuration 1: X = 3640 mm / Y = 1535 mm / Z = 250 mm
Working area configuration 2: X = 3390 mm / Y = 1535 mm / Z = 250 mm
Working range configuration 3: X = 3390 mm / Y = 1535 mm / Z = 275 mm
CE safety devices
6 ATS workpiece supports - L = 1525 mm - 18 module carriers
Automatic positioning of the 6 workpiece supports (EPS)
6 stops with 115 mm stroke
6 stops with 140 mm stroke positioned at 770 mm from the rear (L = 1280 / 1525 / 1800 mm)
4 lateral stops with 140 mm stroke (2 left + 2 right) complete with pneumatic equipment
6 veneer stops
16 sensors for monitoring the lowering of the fence
12 narrow part clamps
Pneumatic pre-equipment for positioning aids - 2 independent working areas
4 positioning aids for vacuum module height = 74 mm
12 vacuum modules 132 x 146 x 74 mm LWH
6 vacuum modules 132 x 75 x 74 mm LBH
Chip conveyor belt integrated in the machine bed
Vacuum system for one vacuum pump 250 m3/h
Vacuum pump 250 m3/h
Configuration 3
Equipment C3-A1
Machining unit with 5 interpolating axes (5-axis head)
1600 W cooling liquid system for electrospindles
Special flange for mounting the units on the 5-axis spindle
Equipment C3-P2
Additional Z-axis support for rear machining units, with independent Z-axis
BH 33 L drilling head
Chain tool changer magazine with 33 pockets and 120 mm grid spacing
HSK F63 tool holder, with integrated flange, for saw blades up to max. 350 mm
Saw blade 300 mm, for tool holder
Automatic lubrication system
NC-Hops 5 axis machine license
NC-Hops 5 axis office version 1st license