Belshaw Mark VI Donut System

Donut System with Dual Automatic Dropper – for Cake Donuts Only

Includes
Donut Robot® Mark VI Fryer
Rack Loader (Not Pictured)
EZ Melt 34 Filter
NEW! Dual Automatic Dropper with all accessories – wired in and ready to go!
(1) S/S Table

FRYING AREA inches 43” x 20”
FRYING DEPTH inches 4.5″
SHORTENING CAPACITY (by weight) 124 lbs
SHORTENING CAPACITY (by volume) 17 gal
ELECTRICAL 208-240V, 50/60hz, 3ph amps 32.5 A – 37.2 A

Stainless steel construction with some aluminum components
Stainless steel conveyor with flight bar system for advancing donuts
Automatic turning and dispensing of donuts
Holds 4 donuts per flight bar pocket
On Mark VI Standard, conveyor flight bars are spaced 3¾ inches (95mm) from center to center. Flight bars are round, 3/8″ (95mm) diameter.
Frying time dial sets frying times from approximately 55 to 360 seconds
Thermostat temperature adjustment
High durability, low wattage-density heating elements
High temperature limit switch – cuts power at approximately 450°F (232°C)
Kettle drain with cap (order extended drain and valve separately)