Beckman Coulter Alt-132, Airfuge with digital speed readout

1x, Beckman Coulter, Alt-132 Airfuge with digital speed readout

With the ability to provide a simple, rapid method of removing
chylomicrons (fat particles in lipemic samples), the Airfuge CLS delivers
accurate results for lipemic clarification. Lipemic samples can be cleaned
in 10 minutes, eliminating the need for sendouts.

Features:
The easy-to-operate tabletop centrifuge:
Reaches top speed in as little as 30 seconds
Decelerates smoothly to help keep sample contents separated
Operates just a few degrees above ambient temperatures
Offers run timed runs up to five hours, with hold position for long runs
The Airfuge® CLS offers enhanced versatility with a variety of rotors:

Batch rotor pellets particles from a large sample.
Electron microscopy particle-counting rotor (EM-90) sediments
particulates from very small volumes onto supports suitable for insertion
into an election microscope.
Four fixed angle rotors (A-110; A-100/18; A-100/30; and A-95) generate
the high speeds and forces necessary to perform a variety of tasks
Airfuge® Air-Driven Ultracentrifuge. Requires 42psig (290 KPa) aire
pressure at 0.0016 cubic meter/s (3.5 scfm) for routine operation
Connecting hose and air filter included with instrument

UNSPSC:
41103901
Height:
20 cm (8 in)
Width:
28 cm (11 in)
Depth:
38 cm (15 in)
Weight:
10.4 kg (23 lb)
Approximate Acceleration Time:
30 to 60 sec
Approximate Deceleration Time:
2.5 to 5.5 min
Electrical Requirements:
50 Hz, 100 or 220 to 240 VAC; 60 Hz, 120 VAC
Set Time:
to 5 hr in 5-min increments or continuous (hold)
Speed Range:
80,000 to 110,000 rpm
Pollution Degree:
2
Finish:
Control panel: coated polycarbonate
Top surface: urethane paint.
Other surfaces: general purpose paint.