Balemaster 4260G-8

Rebuilt Balemaster
Two (2) 25 HP Motors
8” Main Cylinder
Ram Face Pressure: 110 PSI
Total Compression Force: 150,900 lbs.
Bale Size: 40” x 36” x Variable
Hopper Opening: 34” x 40”
System Pressure: 3,000 PSI
Cycle Time: 25 Sec.

The following was performed:
1) Repack all cylinders
2) Clean motors and replace bearings as needed
3) Drain and clean hydraulic tank
4) Steam clean baler
5) Replace liners and floor as needed
6) Replace conduit as needed
7) Replace hydraulic hoses as needed
8) Rebuild wire tier (twisters, cutters, hooks, et....)
9) Replace wire guide rollers as needed
10) Repair frame as needed
11) Replace "O" rings as needed
12) Check all switches, repair, or replace as needed
13) Check photocells and repair or replace as needed
14) Clean, repair or replace controls and push buttons as needed
15) Replace all filters
16) Check pump reseal, repair, or replace as needed
17) Check and replace as needed all fuses and overloads
18) Check, clean, or replace all motor starter contacts
19) Test run baler
20) Paint and new safety stickers.