Amc polypropylene drum

-Material: polypropylene
-Dim. ø2200x1600mm
-Door: Manual lateral sliding
-Steel structure: Yes
-Reducer: SEW Eurodrive
-Motor: Felm 9kw
-Accessory: recycle system, discharge channel, roller bearings
-Year of production: 2019
-State: ALMOST NEW

n. 1 Drum diam. 2.20 x 1.60 mt. (external dimensions), for retanning and dyeing, built as follows
Drum totally made in Polypropylene material reinforced
outside and inside, complete of shelves and/or pegs in
normal number and disposition for standard type.

2. Structure, with 3 arms , including:
2.1 n.2 Spider in carbon steel with 3 arms, protected externally
by corrosion with hot galvanized and epoxy paint
2.2 n.1 Crown in cast iron ø mm. 1600 machined on at mod. 12
2.3 n. 2 Oscillating bearings with roll bearings, grease lubricated
2.4 All bolts for fixing the frame to the drum made in stainless
steel AISI 316

3 Manual door
3.1 n. 1 Main door type PM/700 (opening dimensions:
mt. 0.65 x 0.78). Completely made in stainless
steel AISI 316, sliding sideways opening,
3.2 n.1 Drainage washing system device, realized with
perforate plastic grating, and equipped with
manual washing valve plastic type
3.3 n.1 Polypropylene collection channel for collection
of the discharged bath

4 n.1 Drive unit, for drum having variable speed ( 6 / 12 rpm ) including:
· Pinion milled teeth M12, made in brone/alluminium material
· electric motor, power 9Kw
· gearbox with resistant steel, assembled on roller bearings
· pneumatic brake

5 Electro-pneumatic panel
5.1 n.1 Electro-pneumatic panel protection IP65 for driving the drum in the two directions,
complete with system for speed control in continuous way realized with electronic frequency variator "Inverter" coupled to electric motor.

6 Automatic electrical plant for control of the
drum at two speed in two directions,
including:
programming of cycle (total time, stop and
go), remote control board (to be placed on
walkway)
The drum is equipped with touch screen
control board and PLC to manage all the
drum functions..The display allows also the
visualisation of messages and alarms.

7 Plant for bath heating and recycling
composed of:
7.1 n. 1 system with internal pocket channel made of
PPH for the collection and the bath and the
conveyance of the same towards the external
tank "LAB-BOX" made of AISI 316 stainless
steel;
7.2 n.1 Rotating joint and piping for the bathroom
conveyance from inside the drum to the lab box
and vice versa through the axis;
7.3 n. 1 Double bottom steam heating system on LABBOX
made of AISI 316 stainless steel,
complete with pneumatic inlet valve and
thermostatic drain for condensates. The total
separation of the service fluid (Steam) from the
bath allows to avoid dilutions and
contamination of the same and at the same
time to achieve a uniform and regular heating.

8 Self-supporting structure,for housing the drum, made of metal carpentry, with a thick
tubular structure, assembled by welding the frames and assembling the parts with
perforated and bolted plates, all hot dip galvanized, the base is also equipped with side
protections, made with PPH paneling, provision of safety barrier with chain and
microswitch.