Altendorf F 45 Evo Drive

Used machine
Basic equipment
Electric height and tilt adjustment
0-46° with automatic cutting height correction
when tilting
Controls at eye level, tiltable
Double sliding table, table length 3,000 mm
Parallel stop, manually adjustable via scale, including manual fine adjustment
Cutting width 1,000 mm
Angle stop with fixed 90° position,
manually adjustable via scale up to 3,200 mm
Maximum sawblade projection 150 mm
Maximum sawblade diameter 450 mm
Drive power 4 kW (5.5 HP) at 4,000 rpm
AKE tool clamping system for the main sawblade
Working height 91 cm

Productivity package
Motor 5.5 kW (7.5 HP) with VARIO F45
- Continuously variable speed control from 2,000 rpm -6000 rpm
- Precise speed adjustment to the material increases cutting quality and sawblade service life.

Extended cutting height for one-sided tilting
This option is equipped with a large extraction hood for a max. sawblade diameter of 550 mm
and a max. sawblade projection of 204 mm for one-sided tilting.
In combination with a scoring unit, the max. sawblade diameter is 500 mm or 179 mm cutting height.
Only in conjunction with a minimum drive power of 5.5 kW (7.5 HP).

Two-sided tilting!
RAPIDO Plus 3-axis scoring unit
With electric height and lateral adjustment, programmable scoring blade height
with quick lowering and quick raising,drive motor 0.75 kW (1 HP), 8200 rpm.
Retrofitting is only possible on machines prepared for a scoring unit.
LED lighting
With particularly energy-efficient LED technology, the danger zone of the scoring unit is clearly marked.

Sliding table with a carriage length of 3000 mm
Basic equipment
Sliding table with a carriage length of 3000 mm
The Altendorf sliding table is famous for its smooth and precise operation. It can be infinitely locked in any position.
The large double rollers, precision-machined from hardened steel, hold the upper carriage in connection
with the lower carriage with absolute precision in the respective hard-chrome-plated guide rods.
This running quality is maintained even after decades of stress and soiling.
The carriage is designed as an extremely torsion-resistant and dimensionally rigid multi-cavity system.
The table surface is precisely planed and anodized.
A hard-chrome-plated round bar, which is positively embedded in the upper carriage,
serves as a mount for the cross slide and as an interface for various accessories.
The entire unit is low-maintenance and requires no lubrication.

DIGIT-L Angle Miter Stop, Cutting to Lengths up to 3500 mm
This ALTENDORF-patented stop with integrated length compensation facilitates precise cutting of angles and miters in one function.
In both positions, the swivel angle is continuously adjustable by 49° and is digitally displayed.
The play-free and robust stop flaps can be easily moved and adjusted as individual stops over the entire range up to a maximum of 3500 mm.

For cutting to lengths up to approximately 1700 mm, the sturdy, roller-supported telescopic extension acts as the outer stop flap.
When cutting miters, the stop can be adjusted to the desired angle using the integrated length adjustment, without the need for re-clamping.
Simply move the stop ruler to the desired angle using the digital display and then set the desired length using the stop flap.

CNC Parallel Stop 1300 mm F45
The CNC-controlled parallel stop can be controlled with a travel speed of 250 mm/sec and a dimensional accuracy of +/- 1/10 mm.
The five-bearing, high-precision ball screw system is low-maintenance and, like the motor, is well-protected and integrated into the aluminum profile.
The stop automatically detects its position, especially in the sawblade's danger zone.
It features an emergency shutdown function to eliminate the risk of crushing.
The dimension correction is automatic when the stop profile is laid flat or upright, as well as when the sawblade is tilted.

Template holder directly on the control at eye level
New double-sided miter stop DUPLEX,
Cutting to length up to 1350mm

Description:
The DUPLEX stops allow angle cuts from 0 to 90° very quickly, precisely, and continuously.
When set to 45°, the miter can be cut on both sides of the saw.