Agilent 1290 Series – G7117B HPLC Diode Array Detector

The Agilent 1290 Infinity II Diode Array Detector (DAD) is based on the Agilent Max-Light cartridge cell
with optofluidic waveguides that improve light transmission to near 100% efficiency sacrificing resolution caused by cell dispersion effects.
With typical detector noise levels of < ±0.6 µAU/cm the 60 mm flow cell gives up
to 10 times higher sensitivity than detectors with conventional flow cells.

Any compromising refractive index and thermal effects are almost completely eliminated,
resulting in significantly less baseline drift for more reliable and precise peak integration.
For fast separations, this detector has multiple wavelength and full spectral detection at sampling rates up to 240 Hz.

Specifications:
Physical Specifications:
Weight: 11.5 kg (25.4 lbs)
Dimensions (height × width × depth): 140 x 396 x 436 mm (5.5 x 15.6 x 17.2 inches)
Line voltage: 100 – 240 V~, ± 10 %
Line frequency: 50 or 60 Hz, ± 5 %
Power consumption: 110 VA, 100 W
Ambient operating temperature: 4 – 55 °C (39 – 131 °F)
Ambient non-operating temperature: -40 – 70 °C (-40 – 158 °F)
Humidity: < 95 % r.h. at 40 °C (104 °F)
Operating altitude: Up to 3000 m (9842 ft)

Performance Specifications:
Detection Type: 1024-element photodiode array
Light source: Deuterium lamp
Number of signals: 8
Maximum data rate: 240 Hz (both spectra and signals)
Short term signal noise (ASTM):
With 10 mm Max-Light cartridge cell: