24” X 24” Up-Acting Four-Post M.O.P. Hydraulic Press

This press was totally rebuilt in 2013.
Excellent condition.
Set up with 4 electrically heated platens with 3 openings of approx. 2.5” each. 25” L
to R BTB .
Max daylight without platens approx. 18.5”
With one pair of platens (single-opening) approx. 12”.
Main ram is 16” diameter with 12” max stroke.
Fully guided with 6” bushings on 5.5”diameter tie-rods.
Approx 49” operator height.
Two 3.25” bore side cylinders with 1.375” diameter rods and 13” max stroke.
Light curtains on front; Mesh sides and rear.
Floor standing hydraulic unit: 10 HP (1800RPM;
480 volt); 60 gallon tank;
air type oil cooler (1/4 HP);
approx. 2800 PSI; adjustable tonnage (80 to 300);
digital tonnage gauge; 100 IPM fast close and open;
2 to 6 IPM pressing etc…
Electrical control system: Allen-Bradley Micrologix 1400 PLC;
Red Lion 7” color HMI; Ethernet port; one touch cycle start;
optional bump/degas; cycle counter; etc…
Press dimensions approx. 88” x 45” x 82” tall (17,500 pounds);
Hydraulic unit: 67” x 47” x 70” tall (2000 pounds).
Electrical and hydraulic prints.