2 Unknown Up-Acting Presses

TWO PRESSES ON A COMMON BASE WITH CONTROLS AND HYDRAULIC UNITS.
10” X 10” NOMINAL PLATEN SIZE.
DISTANCE BETWEEN SLAB SIDES IS 11” L TO R.
DAYLIGHT WITH PLATENS 28”, DAYLIGHT WITHOUT 31”.
TWO ELECTRIC PLATENS 10” X 10” X 1” THICK WITH THREE CARTRIDGE HEATERS EACH.
APPROX STROKE 22”.
DOUBLE ACTING MAIN RAM 5 ½” BORE, 4 ¼” ROD, BOTTOM PORT 1 ½” NPT, ROD PORT 1” NPT, RATED AT 2500 PSI.
MOVING BOLSTER GUIDED ON BRASS WEAR BARS.
APPROX PRESS SPEEDS: CLOSE 180” MIN; PRESSING ADJUSTABLE FROM 1” – 60” MIN; OPEN 250” MIN.
POWER UNIT WITH TWO 15 HP 1800 RPM 230/460 VOLT 60 HZ 3 PH MOTORS
TWO HYDURA PRESSURE COMPENSATED PISTON PUMPS MODEL PVQ 20A LSAY CN; 20 GPM.
150 GALLON RESERVOIR.
DOUBLE A SOLENOID VALVES
RETURN LINE FILTERS, AND WATER COOLER.
COMPLETE CONTROL PANEL INCLUDING PAM BUTTONS, E-STOP, BUMP BUTTONS, OPEN BUTTONS,
HYDRAULIC STOP/START BUTTONS, CURE TIMERS, PLATEN HEATER CONTROLLERS,
ONE SYSTEM IS MISSING 4 PLATEN HEATER CONTROLLERS.
OPERATOR HEIGHT 45”.
OVERALL DIMENSIONS 80” L TO R X 84” F TO B X 84” TALL
APPROX WEIGHT 12,000 LBS