2 Barmag Texturizing machines
EUROPE (Western and Northern)
AIR TEXTURIZING MACHINES, YEAR 2010
EACH MACHINE CONSISTS OF THE FOLLOWING UNITS:
-MONOFILAMENT TEXTURING UNIT FOR ONE YARN, WITH 2 ELECTRICALLY HEATED GODETS, EACH ONE WITH SEPARATING ROLLER
DIAMETER: 132mm
LENGTH: 150mm
1 HEATING ZONE PER GODET
GODET TEMPERATURE: MAXIMUM 180 °C
TEMPERATURE TOLERANCE ON GODET SURFACE: +/- 2 °C
TEMPERATURE TOLERANCE BETWEEN GODETS: +/- 1.5 °C
SEPARATING ROLLERS WITH BALL BEARINGS, WITH 1 PIECE TEXTURING JET
FOR TEXTURIZING OF VARIOUS YARNS
HEATER FOR COMPRESSED AIR WITH AUTOMATIC TEMPERATURE AND PRESSURE CONTROL
COOLING DRUM WITH BLOWER AND AIR FILTER
DIAMETER OF COOLING DRUM WERE THE TEXTURED YARN IS RUNNING: 346mm
BLOWER CAPACITY: 2.2 KW
LARGE SIZE AIR FILTER
CHROMIUM PLATED TAKE-OFF ROLLER WITH SEPARATING ROLLER TO SUPPLY THE TEXTURED YARN FROM THE COOLING DRUM TO THE WINDER
WINORO-M AUTOMATIC PRECISION CROSS WINDER
PRECISION WINDING WITH ELECTRONIC GEAR FOR CHANGING THE WINDING RATIO SEVERAL TIMES
DURING WINDING OF ONE BOBBIN FOR EXCELLENT BOBBIN QUALITY EVEN WITH THE SLIPPERY ARTIFICIAL GRASS MONOFILAMENT
FULLY AUTOMATIC BOBBIN CHANGE
WITH MAGAZINE FOR UP TO 4 PIECES OF EMPTY WINDING TUBES
WINDER WITH DECREASING BAIL ROLL PRESSURE AND WITH DECREASING WINDING TENSION FOR
WINDING OF TEXTURED YARN WITH EXCELLENT BOBBIN QUALITY
WINDING ON TO CHEAP PAPER TUBES TYPICALLY USED IN BCF YARN PRODUCTION
BOBBIN DIMENSIONS:
INNER DIAMETER: 73mm
LENGTH OF TUBE: 290mm =/- 0.5mm
TRAVERSE: 250mm
OUTER DIAMETER OF TUBE: 79mm
DEPOSIT OF FINISHED BOBBIN ON TO PARKING POSITION BELOW THE WINDER
SIGNAL FLASH LAMP FOR ALARM OF EMPTY TUBE MAGAZINE
SWITCH CONTROL BOX WITH NUMBER OF INVERTERS FOR EACH TEXTURING POSITION
1 INVERTER FOR EACH UNROLLING POSITION, TOTAL 2 PIECES
1 INVERTER FOR EACH HEATED GODET, TOTAL 2 PIECES
1 INVERTER FOR COOLING DRUM, 1 PIECE
1 INVERTER FOR TAKE-OFF ROLLER, 1 PIECE
4 INVERTERS FOR AUTOMATIC WINDER, TOTAL 4 PIECES
TOTAL NUMBER OF INVERTERS PER POSITION, TOTAL 10 PIECES
MAKE OF INVERTERS: SIEMENS
EACH 2 POSITIONS CONSIST OF THE FOLLOWING UNITS:
1 UNROLLING TOWER WITH 2 UNROLLING POSITIONS, EACH UNROLLING POSITION IS YARN TENSION
CONTROLLED
EACH UNWINDING POSITION SUITABLE FOR FOLLOWING TUBE DIMENSIONS
FLANGED BOBBINS WITH:
TUBE INNER DIAMETER: 90mm
DIAMETER OF FLANGES: 260mm
TUBE LENGTH: 310mm
TRAVERSE: 280mm